HOLLEY DOMINATOR BILLET FUEL PUMP 80PSI

Holley Dominator billet fuel pumps feature a patent-pending twin-pump design. It allows you to use one pump for cruising and both pumps when you activate the nitrous switch or start building boost. By staging the second pump, you eliminate the unnecessary recirculation and heating of extra fuel, which can lead to poor performance and hot fuel issues.

They can also be wired for full-time duty to get the maximum performance and are proven with an 18 V compatibility at pressures of up to 80 psi. At only 5.1 lbs., they weigh half a pound less than other 1,000 hp pumps, and yet they have twice the features.

Features include:

• Billet aluminum construction with anodized finish.
• -10 AN O-ring inlet/outlet for high flow and superior sealing.
• Excellent for use with carburetor or EFI applications.
• Compact for easy installation on frame rails or other tight spaces.
• Proven durability beyond 3,000 hours in gasoline or diesel fuels.
• Fully sealed, can be submersed if necessary.

NOTE: Maximum draw is 17.2 amps. This is a race only pump that shouldn't be run longer than 20 minutes. Pump was not intended for street driven vehicles that regularly see ambient temperatures above 90 degrees.

Universal.

AN Fittings.

Fuel Pressure Regulators.

Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products.

Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.