HOLLEY VR SERIES BILLET FUEL PUMP

Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event).

The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3000 hp, Holley has a brushless pump for you.

Bypass-style fuel pressure regulator and return line are required. Includes a 2-step controller for pump speed control.

Features include:

• Pumps can be run in one of two different speeds.
• Low speed control for low fuel consumption requirements.
• Full speed for high fuel consumption requirements.
• Proven for 18.5 V compatibility.
• Provide sufficient fuel flow for forced induction applications.
• Built for continuous duty if required.
• Dual-pump models are designed for endurance racing—use both or one can be a reserve pump.
• AN O-ring inlet/outlet.
• High flow and high pressure with low amperage draw .
• Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps.
• Not for use on aircraft of any type.
  
  

Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.

Universal.

AN Fittings.

Fuel Pressure Regulators.

Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase. Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products.

Holley Performance Products also does not warrant, and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog. Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.