HOLLEY EFI UNIVERSAL 4 BARREL 1000 CFM 4150 THROTTLE BODY HC GREY

Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies feature integrated throttle position, idle air control and intake air temperature sensors to work with your aftermarket multi-port EFI system. Their standard square bore mounting pattern is designed to fit perfectly on most intake manifolds and the stout 1,000 cfm can handle high horsepower with no problem. These units have a CFD computer-designed modeled air entry area--so maximum velocity and accelerated air speed are delivered to the engine. The high-flow idle air control passages are great for large cu. in. to aid in idle stability.

Holley universal 4-barrel 1000 cfm 4150 flange throttle bodies have an integrated GM 700R4 transmission kickdown location, as well as a kickdown lever for use with Ford transmissions. They feature all necessary vacuum ports, one timed spark, two 3/8 in. and two 3/16 in. full manifold vacuum ports. The 1.750 in. diameter throttle plates are mounted to PTFE-coated throttle shafts for high flow and smooth feel. Their high-quality die cast aluminum construction provides excellent strength while reducing weight, and they're offered in your choice of tumble polish or hard gray anodized finishes.

Holley's new 1000 CFM Throttle Body shares the same air entry area design that powers every NASCAR Sprint Cup Series™ car! 

Features:

• Standard square bore mounting pattern for installation on many intake manifolds.
• Flows 1000 CFM to handle high horsepower engines.
• Exclusive CFD computer modeled air entry area delivers maximum velocity and accelerated air speed.
• Integrated TPS, IAC, and Air Temperature Sensor.
• Hi Flow IAC passages for large cubic inch engines for idle stability.
• Ford Transmission kick down Lever for use with Ford automatic transmissions.
• Integrated GM 700R4 transmission kick down location no adapters needed.
• All necessary vacuum ports (1) timed spark, (2) 3/8" and (2) 3/16" full manifold vacuum ports.
• 1.75" throttle plates mounted to PTFE coated throttle shafts for high flow and a smooth feel.
• High quality die cast aluminum for strength and weight reduction.
• Tumble polished finish.

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

Designed to fits 4150 intake flanges, features integrated Ford and GM 700R4 kickdowns.

Holley Performance Products, Inc. products are warranted to be free from defects in material and workmanship for a period of 90 days from the date of purchase, except Avenger series carburetors, which carry a lifetime warranty on parts and a one-year warranty on labor. Any Holley deep cell battery also carries a one-year warranty. For select carburetors and superchargers, there will be a core charge. If the part qualifies, there will be a letter and a call tag included in the box from Holley.

The part must be returned to Holly, and if it is in acceptable condition, Holly will issue credit directly to the customer. In addition, Holley Performance Products, Inc.'s limited warranty specifically does not apply to products which have been modified or altered in any way, subjected to adverse conditions such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion or faulty repair, or used in applications other than those recommended by Holley Performance Products, Inc. This warranty does not warrant and disclaims all liability for products used in racing activities and/or applications, other than those specifically recommended by Holley Performance Products, Inc.