725 SOUTH LA CADENA DRIVE COLTON CA USA 92324
909.291.7550

CBM MOTORSPORTS™ SUPERCHARGED 454 RHS LS

CBM MOTORSPORTS™ SUPERCHARGED 454 RHS LS
CBM MOTORSPORTS™ SUPERCHARGED 454 RHS LSCBM MOTORSPORTS™ SUPERCHARGED 454 RHS LSCBM MOTORSPORTS™ SUPERCHARGED 454 RHS LS
CBM MOTORSPORTS™ SUPERCHARGED 454 RHS LSCBM MOTORSPORTS™ SUPERCHARGED 454 RHS LSCBM MOTORSPORTS™ SUPERCHARGED 454 RHS LS
CBM MOTORSPORTS™ SUPERCHARGED 454 RHS LSCBM MOTORSPORTS™ SUPERCHARGED 454 RHS LS

Part Number: CBM-SC-454

Please call 909.291.7550 for current base package and upgrade pricing.

$10.000 deposit required when ordering.


Available Product Add-Ons and Upgrades


Please call 909.291.7550 for current base package and upgrade pricing.

CBM MOTORSPORTS™ SUPERCHARGED 454 RHS LS Product Description:

Overview

The CBM Supercharged 454 RHS LS is a 7.4L LS with a Whipple 4.5L supercharger, it puts out 900+ hp @ 6400 RPM's and 875 ft-lbs of torque with a compression ratio of 9.1.

This build features CBM ProX 6 bolt cylinder heads with Jesel Valve Train and a forged lower end - fully balanced and blue printed. All CBM engines are assembled and delivered with brand new components and parts. Images may contain upgrades.

Base Package Included Components:

  • RHS 7.4L Block.
  • Callies Magnum Crankshaft.
  • Callies Ultra Connecting Rods.
  • Race Tec or CBM/JE Forged Pistons.
  • Total Seal file fit rings.
  • ARP Main Studs.
  • CBM/Comp Custom Grind Camshaft. (mild to wild your choice)
  • CBM ProX Cylinder Heads w/Jesel Rockers.
  • Manley Intake/Exhaust Valves.
  • Manley Chromoly Push Rods.
  • Manley Nextec .700" dual spring kit.
  • Johnson Short Travel Race Style Lifters.
  • Chevrolet Performance or Moroso Oil Pan. (application dependent)
  • Melling Oil Pump.
  • CBM Mil Spec Wiring Harness.
  • GM Coil Packs.
  • CBM Ignition Wires.
  • CBM Billet Valve Covers.
  • CBM Coil Relocation Brackets.
  • Delphi Alternator.
  • Gates Water Pump.
  • ATI Balancer.
  • CBM Billet Manual Belt Tensioner.
  • CBM Billet Fuel Rails, AN Fittings.
  • Seimens 80lbs Fuel Injectors.
  • CBM/Accufab Billet 105mm Mechanical Throttle Body.
  • Whipple 4.5L Supercharger System with Inner Cooler, front or rear feed. (upgrade available rear feed only)
  • CBM Billet Double Belt Drive System.
  • Cometic, Mahle, GM Gaskets.

Component Upgrades Available:

  • Callies Ultra Billet Crankshaft. (View)
  • Manley Titanium Intake/Exhaust Valves (View)
  • Dailey Engineering 5 Stage Dry Sump System (View)
  • MSD Ignition Coil Packs (View)
  • CBM Billet High Amp Alternator (View)
  • F.I.C. 80lbs Fuel Injectors. (View)

    Each CBM Engine is made to order, pricing and packages may vary. Custom options are also available, we have clutch kitstransmission adapter platespower steering componentscomplete fuel systemsaccessory drive systems and data acquisition/display systems to fit your application.

    Please call for current base package and upgrade pricing, availability and a lead time.

    909.291.7550 ext. 2000.

    A $10.000 deposit required when ordering.


    Specifications

    Brand: CBM Motorsports
    Part Numbers: CBM-SC-454
    Other Part Numbers: SC-454
    Engine Type: LS Small Block V8
    Horsepower: 900@6800 rpm
    Torque: 875 ft lbs
    Compression Ratio: 9.0:1
    Displacement: 454ci
    Bore x Stroke (in): 4.125 x 4.250
    Block: Cast Aluminum, Iron with 6 Bolt
    Cylinder Heads: Aluminum
    ECM Included: No (base package)
    Wiring Harness Included: Yes
    Quantity: Sold as a Package
    In Store Pickup: Colton, CA, USA

    Blueprinting

    CBM Motorsports Engine Blueprinting Process:

    • Engine block is fully deburred and inspected for flaws.
    • Oiling holes are chamfered for improved oiling to bearings.
    • Cylinders machined for rod clearance per application.
    • Cylinders honed with torque plates for optimal clearance per application.
    • Optimal cylinder geometry achieved with hone and surface finish verified with profilometer.
    • Deck surfaces machined perpendicular to mains and deck height set for optimal quench.
    • Block align honed and set to low of spec for maximum bearing crush.
    • Cam bearings installed and test cam fitted to ensure smooth rotation.
    • Crankshaft balanced within 1/2gm-in tolerance.
    • Block and components deburred and cleaned after machining process.
    • Connecting rod housing bores checked and adjusted for optimal roundness and size.
    • Piston pin bores measured and adjusted for application.
    • All main bearings and all rod bearing clearances measured and adjusted for application.
    • All oil galley plugs and dowel pins installed.
    • Piston rings are precision file fit per application.
    • Final assembly of shortblock.
    • All tolerances, clearances, machining specs, and part numbers are recorded and documented in build sheet.

    Application

    Racing.

    Product Video

    Ordering

    Each CBM Engine is made to order, pricing and packages may vary. Custom options are also available, we have clutch kitstransmission adapter platespower steering componentscomplete fuel systemsaccessory drive systems and data acquisition/display systems to fit your application.

    Please call for current base package and upgrade pricing, availability and a lead time.

    909.291.7550 ext. 2000.

    A $10.000 deposit required when ordering.

    Warranty

    CBM Motorsports, LLC hereby warrants that new Engines purchased from CBM Motorsports, LLC will be free from defects in material and workmanship for the period of time stated herein, subject to certain stated limitations. No engines rated over 800 flywheel horsepower.

    The Period of Warranty for CBM Motorsports, LLC engines shall be (25) hours on ECM or 6 months from date of purchase.

    Engines excluded from Warranty include any engines used for race purposes or Commercial purposes.

    During the Period of Warranty CBM Motorsports or any authorized dealer will free of charge, repair or replace parts or engine due to faulty workman-ship or material defects from the factory at CBM Motorsports, LLC discretion. Parts used in warranty repairs will be warranted for the balance of the product’s warranty period. All parts replaced under warranty become property of CBM Motorsports, LLC. CBM Motorsports will only authorize warranty work at CBM Motorsports, LLC facility or an authorized dealer. Any unauthorized work or labor will not be covered.

    General Exclusions from this warranty shall include any failures caused by:

    1. Competition or racing use.
    2. Installation of parts or accessories that is not qualitatively equivalent to genuine CBM Motorsports, LLC or GM Authorized parts.
    3. Abnormal strain, neglect or abuse.
    4. Lack of Proper maintenance.
    5. Accident or collision damage.
    6. Modifications to original parts.
    7. Damage due to improper transportation.
    8. Improper Installation of Engine Accessories or related items.
    9. Improper Installation of Engine.
    10. Improper Fuel System and Radiator.

    Specific exclusions from this warranty shall include parts replaced do to normal wear or routine maintenance, such as spark plugs, oil, oil filter, air filter ect.

    The Customer’s Responsibility under this warranty shall be to:

    Operate and maintain the CBM Motorsports engine as specified in the appropriate owners manual, and give CBM Motorsports notice of any and all apparent defects within ten days after discovery, and make the engine and/or vehicle available at that time for inspection and repairs at CBM Motorsports place of business. Note: If an engine is returned under warranty it must arrive the way it was picked up/shipped. Example: If you purchased a CBM Motorsports long block and had it installed in a vehicle by a third party, only the long block itself should be returned out of the vehicle not the vehicle with the long bock installed.

    Warranty Transfer:

    To transfer the warranty from the original purchaser to any subsequent purchaser(s), it is imperative that the CBM Motorsports, LLC
    and registration must take place within (10) days after transfer of ownership to the subsequent purchaser, A reasonable dealer imposed fee may be charged for this inspection.

    Emission Control System Warranty:

    CBM Motorsports, LLC also warrants to the ultimate purchaser and each subsequent purchaser of each 2006 and later model CBM Motorsports, LLC Engine covered by this warranty that the engine is designed, built, and equipped so as to conform at the time of sale with all U.S. Emissions standards applicable at the time of manufacture and that it is free from defects in materials and workmanship which would cause it not to meet these standards. Failures other than those resulting from defects in material or workmanship which arise solely as a result of owner abuse and/or lack of proper maintenance are not covered by this warranty. Purchasers will be notified any and all recalls and the purchaser is responsible for making arrangements to bring engine / vehicle to authorized repair facility to comply with re-call. If purchaser does not comply, CBM Motorsports, LLC will not be held liable for damages or injury.

    CBM Motorsports LLC makes no other warranty of any kind, expressed or implied. All implied warranties of merchantability and fitness for a particular propose which exceed the obligations and time limits stated in this warranty are hereby disclaimed by CBM Motorsports, LLC and excluded from this warranty.

    Download CBM engine warranty here.

    Product Reviews Write A Review

    Comments

    No reviews yet, be the first to review this product!

    Product Q & A


    Related Products
    CBM MOTORSPORTS AEM CD-7 CARBON DIGITAL RACING DASH DISPLAY KIT
    CBM MOTORSPORTS AEM CD-7 CARBON DIGITAL RACING DASH DISPLAY KIT

    Price: $1,510.95

    CBM MOTORSPORTS AEROMOTIVE ELIMINATOR FUEL SYSTEM
    CBM MOTORSPORTS AEROMOTIVE ELIMINATOR FUEL SYSTEM

    Price: $1,299.99

    MoTeC C187 COLOR DISPLAY DASH
    MoTeC C187 COLOR DISPLAY DASH

    Price: $5,990.00

    HOLLEY EFI HP EFI ECU
    HOLLEY EFI HP EFI ECU

    Price: $1,647.95