This brand new Chevrolet Performance LS376/525 Crate Engine puts out 525 HP @6200 RPM and 486 LB-FT @5200 RPM. The ASA camshaft is a hydraulic roller with .525-inch lift on both sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side.
| Part Number: |
|
CHP-19419890 |
| Other Part Number: |
|
19419890 |
| Engine Build Type: |
|
New crate engine. |
| Compression Ratio: |
|
10.7:1 |
| Displacement: |
|
376ci |
Engine Block:
|
|
6.2L Cast aluminum 6 bolt. |
| Bore (in.): |
|
4.065" |
Stroke (in.):
|
|
3.622" |
| Crankshaft: |
|
Nodular iron |
| Connecting Rods Length (in.): |
|
6.098 |
| Reluctor Wheel: |
|
58x |
| Connecting Rods: |
|
Powdered metal |
| Pistons: |
|
Hypereutectic aluminum |
| Camshaft Type: |
|
Hydraulic roller |
| Camshaft Duration: |
|
(@0.050 in.): 226° intake / 236° exhaust |
| Cylinder Heads: |
|
L92-style port; “as cast”. |
| Valve Size (in.): |
|
2.165 intake / 1.590 exhaust |
| Rocker Arms: |
|
Investment-cast, roll trunnion |
| Oil Pump: |
|
Stock |
| Timing Set: |
|
Stock |
| Push Rods: |
|
Stock |
| Lifters: |
|
Stock |
| Oil Pan: |
|
Stock |
| Balancer: |
|
Stock |
| Intake Manifold: |
|
Stock |
| Throttle Body: |
|
Stock 90mm |
| Fuel Rails: |
|
Stock |
| Fuel Injectors: |
|
Stock |
| Water Pump: |
|
Stock |
| Power Steering Pump: |
|
None |
| Alternator: |
|
None |
| Machine Work Performed: |
|
Internal balance |
Engine Sensors:
|
|
Stock |
| ECU: |
|
None |
| Quantity Available: |
|
One |
| In Store Pickup: |
|
Colton, CA, USA |
We have clutch kits, transmission adapter plates, power steering components, complete fuel systems, accessory drive systems and data acquisition/display systems to fit your application.
If you need more info. or would like to place an order over the phone, please call 909.291.7550 ext. 2000, M-F 9am-5pm PST.
Place an in stock engine order online, in store or by telephone.
If you need more info. or would like to place an order over the phone, please call 909.291.7550 ext. 2000, M-F 9am-5pm PST.
In Stock Engine orders shipping methods and shipping costs:
- In store pick up by customer #1, $0 customer supplied engine stand.
- In store pick up by customer #2, $99.00 includes engine stands.
- Shipping materials required for delivery to customer, $374.99 includes a engine stand in a crate attached to a pallet.
- Delivery to customer, this cost depends on the weight, location and type of shipping you choose at check out. This dollar amount is in addition to the Shipping materials cost required for delivery to customer. A signature is required upon delivery.
Limited Warranty Backed By Chevrolet.
Chevrolet Performance Engine (part only): 24 Month/50,000 Miles†
†Parts and labor warranty when installed by a GM Dealer or qualified installing independent Service Center (ISC) or when sold over the counter and REPAIRED by a GM Dealer or qualifying ISC. Parts only when consumer repaired or installed in non-highway application. Coverage limited to defects in material and/or workmanship of the specific part only. Warranty valid when all required components are installed on the same vehicle and purchased on one invoice.
Unless specifically noted to the contrary herein, vehicles equipped with Chevrolet Performance parts that are emissions-related may not meet U.S., Canadian, and state and provincial laws and regulations relating to motor-vehicle emissions. These parts are designed and intended for use in vehicles operated exclusively for competition: in racing or organized competition on courses separate from public streets or highways. Visit www.chevroletperformance.com/emissions for more details. Rebate form and details available at chevrolet.com/performance/offers.
