The ADU7 AutoSport Display is identical in spec to the regular ADU7, but features a 37 position AutoSport connector instead of the AMP connector on the original ADU7. AutoSport connectors are used in the highest tiers of motorsports and are the most compact and robust available. This connector uses a size 22 gold plated solid contact. Please ensure you have proper tooling available.
The ADU7 was designed in response to market demand for a cost-effective dash display with logging capabilities. The specific goal was to create a fully customizable, feature-rich, quality solution for competitive drivers. ECUMaster consulted professional drivers and race engineers and designed the ADU to exceed their requirements.
Above all, the ADU is designed to display all critical information in an easy to read manner, along with a comprehensive strategy for displaying alarms.
The Advanced Display Units are available in 5” and 7” versions. Both versions feature high resolution, high visibility anti-glare screens, guaranteeing perfect visibility in any lighting conditions. The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.).
Pages may be changed manually or automatically (based on defined conditions). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified in real time using user-friendly Windows based software. The comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independent of the actual page displayed.
The ADU is also equipped with 15 ultra-bright RGB LEDs which can be used as an advanced gear-depended shift light and can be modified by user-defined logic (for alarms, low fuel level, etc.).
Using IR beacons or a GPS system, the dash turns into a powerful lap timer with a predictive timing function. By selecting the Qualification page, you enable a “Qualification Mode” which uses advanced predictive lap timing based on an automatically updated “best” reference lap.
User configurable timers can be adjusted for additional functionality (pit stop timer, etc.). The ADU also supports thermal cameras for monitoring brake discs or tyre temperatures (up to 16 points per tyre). Communication with other devices in the car is provided via two built-in, independent CAN-BUS communication ports.
CAN templates are provided for most popular ECUs, and are fully configurable, allowing you to connect our hardware to virtually any engine management system.
To ensure that all features work seamlessly, the device is based on a 32-bit automotive controller paired with a state of the art graphics processor.
This combination provides the perfect working environment for any engineer or driver and guarantees anti-aliased, high-quality graphics at 50 frames per second.
For further data analysis, data channels can be logged to a USB Flash drive with a frequency of up to 500Hz.
All of these “Must Have” features and more are housed in a rugged, specially CNC machined, black anodized enclosure.
Free, easy to install firmware upgrades further improve system capabilities (e.g. new strategies, trigger patterns, CAN data streams).
Features:
- Real time clock built in with battery backup.
- Lap timer with memory, predictive timing, triggered by a beacon or GPS.
- User defined CAN streams up to 48 input messages.
- Predefined CAN streams for popular ECUs.
- Accelerometer.
- Built in light sensor for auto brightness.
- 48 available pages, user defined content, custom graphics allowed.
- User defined overlays allowed.
- CNC Aluminum enclosure.
GENERAL:
Operating voltage:
- 6-22V, immunity to transients according to ISO 7637, with reverse polarity protection.
CPU:
- 32 bits, automotive, 90MIPS Temperature range: -30°C to 80°C.
Enclosure:
- Anodized aluminum, CNC machined.
Connector:
- IP61 automotive 36-way AMP connector.
5” display:
- Antiglare TFT, 800x480, active area 108x64.8mm, luminance 600 cd/m2.
7” display:
- Antiglare TFT, 800x480, active area 154.08x85.92mm, luminance 500 cd/m2.
Alarms:
- 15 x ultrabright RGB LEDs.
COMMUNICATION:
- CAN: 2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial: RS232 (Rx,Tx).
USB:
- Yes, for data logging (dash programming must be done via CAN, using CAN to USB adapter, Peak Pcan, or Kvaser cable).
Inputs:
- Analogue inputs: 8 analogue inputs, 10 bits, 500Hz, software selectable pullups/pulldowns.
Digital inputs:
- 8 inputs with user defined sensitivity Outputs: General purpose 2 x protected 3A low side outputs.
SUPPORTED ECUs :
- AEM
- Autronic SM-4
- DTA Fast S series
- Ecumaster EMU CLASSIC serial
- Ecumaster EMU CLASSIC CAN
- Ecumaster EMU BLACK
- Ecumaster PMU
- Emtron
- EVO X
- Hondata Kpro
- Life Racing
- LINK ECU
- MaxxECU
- Megasquirt 2 & 3
- MoTeC M400,M600, M800
- MoTeC M1
- Pectel SQ-6
- Syvecs
- VI-PEC
- OBD 2 over CAN ecus
Any ECU able to send data over CAN BUS.
