The C125 comes standard as a combined full color display and powerful control device that is readable in direct sunlight. With the addition of the Data Logging upgrade it becomes a fully programmable data logger with 120 MB memory. Measuring 125 mm (approx. 5 inches), the ultra bright screen is vibrant and anti-reflective, making it easy to view in direct sunlight. The C125 acquires data from other devices such as an ECU and can display data channels, warning alarms, lap times, fuel calculations, minimum corner speeds, maximum straight speeds and much more.
Includes a built-in array of 10 programmable, multi-colored LEDs for shift lights and other driver alerts. Numerous selectable layouts supplied, including an RPM sweep, RPM dial and a multi-value style ideal for the dyno or warm up. Each is available in four color variations. (red, green, blue, white) All layouts include a multi-purpose, zero-centred bar graph primarily for Lap Gain/Loss but can be configured for other purposes such as Fuel Level, G-Force (Lat or Long) and Steering Angle.
Three programmable 'pages' enable users to tailor layouts for different scenarios, for example: Dyno, Qualifying, Race, Driver 1/ Driver 2. Ensures only the most relevant information is displayed at any given time. Configurable channels, measurement units and warnings. 48 user-defined alarms, for example Low Oil Pressure, Low Fuel, Fastest Lap. Display Creator upgrade enables full customization of the display graphics, including imported images,
logos, custom icons, tailored screen layouts, creative gauges and more. Supports Wideband Lambda from MoTeC PLMs or LTCs, using Bosch LSU or NTK UEGO 5 wire sensors. Includes i2 Standard Data Analysis software (Pro Analysis version optional). Compatible with E888 and E816 expanders, and providing full functional use. GPS Data and Lap Timing.
C125 Features
Display:
- High resolution color LCD display.
- Display size 125mm. (5" approx)
- High brightness for sunlight readability.
- Type: Color TFT LCD, anti-reflective.
- Resolution: 800 x 480, anti-aliased graphics.
- Brightness: controlled via CAN message, 100 steps.
- 3 programmable 'pages' for Practice, Warm-Up and Race.
- 48 user-defined, scrollable message lines with programmable overrides.
- 10 color LEDs; color, function and intensity are fully programmable.
Selectable fixed layouts, user programmable layouts minimum corner speeds, maximum straight speeds.
Internal Sensors:
- 3-axis G Force Sensor +/- 5G.
- Dash Temperature Sensor.
- Sensor Supply Voltage.
- Battery Voltage.
Switch Inputs:
- Alarm Ack switch on DIG1.
- Next Line switch on DIG2.
- Brightness switch on SPD3.
Full Digital and Speed functions requires the sensor I/O Upgrade
CAN Communications:
- 2 configurable CAN buses, with individually programmable CAN bus speeds.
RS232 Communications:
- 2 configurable RS232 ports.
Power Supply:
- Operating voltage: 6 to 32 V DC.
- Operating current: 0.5 A typical at 14 V. (excluding sensor and USB currents)
- Reverse battery protection.
- Battery transient protection.
Sensor Supply Currents:
- 5 V sensor supply: 0.25 amp maximum.
- 8 V sensor supply: 0.25 amp maximum.
Operating Temperature:
- Internal: -4 deg F to 160 Deg F.
- Above 140 F maximum backlight brightness progressively reduced.
- Typical maximum ambient temperature in free air: 130 Deg F.
- Typical minimum ambient temperature in free air: -4 Deg F.
For sales questions regarding any MoTeC product please call 909.291.7550 ext. 2004 9am-5pm M-F PST.
C125 Upgrades
Several options are available as upgrades to customize and expand your system. Some of these additional features are activated through a simple password system, at any time when you need it. Upgrading a previously purchased MoTeC product? Click here.
Display Creator: (optional upgrade)
- The Display Creator upgrade allows users to design custom graphics and screen layouts for display on the C125 screen, tailoring the look and functionality to a specific application. Designs can incorporate images, logos, icons, color themes and creative gauge ideas. The Display Creator software is free to download and experiment, but the upgrade must be enabled in order to send screen configurations to the device.
Data Logging: (optional upgrade)
- This upgrade activates the internal 120 MB logging memory for the recording of data from Sensors, Ecus and other Devices.
USB Logging: (optional upgrade)
- Logging to a removable storage device. (flash drive) Requires 120 MB logging memory.
USB Dash Download Cable: (optional upgrade)
- Required for USB logging.
OBD II to Display Loom: (optional upgrade)
- The OBD-II loom is a plug-in adapter that connects the C125 terminated loom to the standard, on-board diagnostics port of many modern vehicles. This enables the C125 to display and log a selection of channels, which differs from car to car. Vehicle compatibility will vary from region to region, but as a guide most cars built after 2007 have an OBD-II connector.
i2 Pro Data Analysis: (optional upgrade)
- This upgrade activates the i2 Pro data analysis software. A i2 Feature License is also available. Provides access to advanced i2 Pro data analysis software with multiple graph overlays, X-Y plots, advanced math functions, synchronized video (automatic alignment), and flexible layouts to accommodate almost any user preference.
Sensor Input / Output Channels: (optional upgrade)
This upgrade activates additional inputs and outputs for the wiring of sensors into the C125.
Includes:
- 6 Analog voltage inputs.
- 4 x 0 to 5.46 V.
- 2 x 0 to 15.0 V.
- 2 Analog temperature inputs.
- 2 Digital Inputs.
- 3 Speed Inputs.
- 4 Low side outputs, PWM or switched operation.
MoTeC's pre-wired C125 I/O Loom: (optional upgrade)
This professional quality, terminated loom provides the wiring for 6 analog voltage inputs and 2 analog temperature inputs.
- The 2 digital and 3 speed inputs are also wired into the button lead of the C125 terminated loom.
- The use of the 4 auxiliary outputs will require custom wiring.
Accessory Kit: (optional upgrade)
Kit includes.
- Terminated harness.
- GPS receiver, 10Hz dash logger.
- Button harness, 2 button switch.
Upgrading a previously purchased MoTeC product.
All Upgrade Option Codes for Motec Products are purchased based on the Serial Number of the product that is to be upgraded.
The Serial Number can be determined by:
- The Serial number can be found printed on the product.
- Connect to the harness and use the Dash Mgr software to read the serial number. Select - Online | Enable Dash Options.
- You can also find the serial number by looking at the logged data file.
Please provide the serial number when ordering the upgrade. Once we receive it the upgrade code will be emailed to you with in 24 hours M-F.
MoTeC prides itself on quality manufacturing and high reliability, and every effort is taken to ensure each product leaving the company meets the highest standards. To support this commitment, MoTeC provides a two year warranty on all MoTeC manufactured items.
