CBM MOTORSPORTS™ 2.4L ECOTEC STAND ALONE WIRING HARNESS WITH OEM ECM Product Description:
This harness and computer are for a stock or nearly stock 2.4L Ecotec. I.E. stock injectors, drive by wire throttle body, stock MAP sensor and so on. This is a speed density system so it does not require the use of a mass air flow sensor (it does use an O2 sensor). The controller is a OEM unit and is tuned for sequential fuel injection for easy starting, smooth running and great economy.
Please specify if you have a header installed or different intake system as this controller will ship with a performance tune for your engine (additional tuning charges may apply for outrageous engine combinations).
This system will work with all 2.4L LE5 Ecotecs running the 58x reluctor wheel and individual coil packs and electronic throttle body. It will not work on a direct injected motor. It comes with a full diagram and labels all connectors. We will need to know what map sensor and alternator your motor runs as GM changed them for different applications.
- Blunt cut wires clearly labeled.
- Genuine weather pack Delphi plug.
- Expandable sleeving.
- All wires are correct AWG and have shrink wrap at each end.
- Four foot lead.
- Water tight relay pack and fuse holder.