725 SOUTH LA CADENA DRIVE COLTON CA USA 92324
909.291.7550

MoTeC C187 COLOR DISPLAY DASH / LOGGER

MoTeC C187 COLOR DISPLAY DASH / LOGGER

Part Number: MTC-18051

Price: $5,990.00
In Stock

 

Quantity:


MoTeC C187 COLOR DISPLAY DASH / LOGGER

MoTeC C187 COLOR DISPLAY DASH / LOGGER Product Description:


With the release of the C187 Display Logger, MoTeC now offers the best of both worlds, a stunning full color display combined with a powerful, professional level data logger. The vivid 178mm screen (approx 7") is high resolution, ultra bright and anti-reflective for easy reading in direct sunlight. It comes standard with 250 MB internal logging memory (can be upgraded to 500 MB). The C187 acquires data from other devices such as an ECU and can display data channels, warning alarms, lap times, fuel calculations, minimum corner speeds, maximum straight speeds and much more.

Includes a built-in array of 10 programmable, multi-colored LEDs for shift lights and other driver alerts. Numerous selectable layouts supplied, including an RPM sweep, RPM dial and a multi-value style ideal for the dyno or warm up. Each is available in four color variations. (red, green, blue, white) All layouts include a multi-purpose, zero-centred bar graph primarily for Lap Gain/Loss but can be configured for other purposes such as Fuel Level, G-Force (Lat or Long) and Steering Angle.

Three programmable 'pages' enable users to tailor layouts for different scenarios, for example: Dyno, Qualifying, Race, Driver 1/ Driver 2. Ensures only the most relevant information is displayed at any given time. Configurable channels, measurement units and warnings. 48 user-defined alarms, for example Low Oil Pressure, Low Fuel, Fastest Lap. Display Creator upgrade enables full customization of the display graphics, including imported images,
logos, custom icons, tailored screen layouts, creative gauges and more. Supports Wideband Lambda from MoTeC PLMs or LTCs, using Bosch LSU or NTK UEGO 5 wire sensors. Includes i2 Standard Data Analysis software (Pro Analysis version optional). Compatible with E888 and E816 expanders, and providing full functional use. GPS Data and Lap Timing.

For sales questions regarding any MoTeC product please call 909.291.7550 ext. 2004 9am-5pm M-F PST.

Overview

Brand: MoTeC
Part Number: MTC-18051
Other Part Number: 18051
Part Type: Data Acquisition / Displays
Mounting hardware included: Yes
Display Type: TFT LCD
Display Screen Resolution: 800 x 480
Display Customization: Yes
Display Housing Material:
Display Housing Finish: Natural
Data Logging: Yes
USB Logging:
Yes, requires optional upgrade
I/O Channels: 30
Digital Inputs: x4
Speed Inputs: x4
Composite Video Input: x3
AUX Outputs x6
Configurable Can Buses: x4
RS232 Ports: x2
Mini USB Port: Yes, requires optional upgrade
Maximum Sample Rate: 500/second
Memory Type: Internal
Internal Memory Size: 250 MB
OBD II Compatible: Yes, requires optional upgrade
Wi-Fi Compatible: No
Wiring Harness Included: No
Quantity: Sold as Kit
Notes: Will log any channel coming in from two independent CAN bus inputs.
In Store Pickup: Colton, CA, USA

Features

C185 Features


Display:

  • High resolution color LCD display.
  • Display size 178mm. (7" approx)
  • High brightness for sunlight readability.
  • Type: Color TFT LCD, anti-reflective.
  • Resolution: 800 x 480, anti-aliased graphics.
  • Brightness: controlled via CAN message, 100 steps.
  • 3 programmable 'pages' for Practice, Warm-Up and Race.
  • 48 user-defined, scrollable message lines with programmable overrides.
  • 10 color LEDs; color, function and intensity are fully programmable.

 Selectable fixed layouts, user programmable layouts minimum corner speeds, maximum straight speeds.

Logging Memory:

  • 250 MB logging memory. (500 MB optional)
  • Logging rates up to 1000 samples per second.
  • Fast Ethernet download using Cat5 Ethernet cable.
  • Includes i2 Standard data analysis software. (i2 Pro available as an upgrade)

Internal Sensors:

  • 3-axis G Force Sensor +/- 5G.
  • Dash Temperature Sensor.
  • Sensor Supply Voltage.
  • Battery Voltage.

Expanders:

  • Compatible with E816, E888, VIM, and SVIM expanders, with full functional use.

Sensor Inputs:

10 Analog Voltage Inputs.

  • 4 x 0 to 5.46 V, 1.33 mV resolution.
  • 6 x 0 to 15.0 V, 3.66 mV resolution.

4 Analog Temperature Inputs.

  • 4 x 0 to 15 V, 3.66 mV resolution.

  • 2 Switch Inputs.
  • 4 Digital inputs Switch or Hall Effect Sensors.
  • 4 Speed inputs Switch, Hall Effect or Magnetic Sensors.

Outputs:

  • 6 Low side outputs PWM or Switched operation.

1.0 Amp max, current limited and thermal overload protected.

CAN Communications:

  • 4 configurable CAN buses, with individually programmable CAN bus speeds.

One can be used as RS232 Receive. Two of the CAN buses support the SVIM expander.

RS232 Communications:

  • 2 configurable RS232 ports.

Power Supply:

  • Operating voltage: 6 to 32 V DC.
  • Operating current: 0.5 A typical at 14 V. (excluding sensor currents)
  • Reverse battery protection.
  • Battery transient protection.

Sensor Supply Currents:

  • 5 V sensor supply: 0.25 amp maximum.
  • 8 V sensor supply: 0.25 amp maximum.

Operating Temperature:

  • Internal: -4 deg F to 160 Deg F.
  • Above 140 F maximum backlight brightness progressively reduced.
  • Typical maximum ambient temperature in free air: 130 Deg F.
  • Typical minimum ambient temperature in free air: -4 Deg F.

Upgrades

C187 Upgrades

Several options are available as upgrades to customize and expand your system. These additional features are activated through a simple password system, at any time when you need it. Upgrading a previously purchased MoTeC product? Click here.


Display Creator: (optional upgrade)

  • The Display Creator upgrade allows users to design custom graphics and screen layouts for display on the C185 screen, tailoring the look and functionality to a specific application. Designs can incorporate images, logos, icons, color themes and creative gauge ideas. The Display Creator software is free to download and experiment, but the upgrade must be enabled in order to send screen configurations to the device.

Data Logging + USB Logging: (optional upgrade)

  • This upgrade increases the internal logging memory from 250 MB to 500 MB and activates USB logging for the recording of data from Sensors, Ecus and other Devices.

USB Dash Download Cable: (optional upgrade)

  • Required for USB logging.

OBD II to Display Loom: (optional upgrade)

  • The OBD-II loom is a plug-in adapter that connects the C187 terminated loom to the standard, on-board diagnostics port of many modern vehicles. This enables the C187 to display and log a selection of channels, which differs from car to car. Vehicle compatibility will vary from region to region, but as a guide most cars built after 2007 have an OBD-II connector.

i2 Pro Data Analysis: (optional upgrade)

  • This upgrade activates the i2 Pro data analysis software. A i2 Feature License is also available. Provides access to advanced i2 Pro data analysis software with multiple graph overlays, X-Y plots, advanced math functions, synchronized video (automatic alignment), and flexible layouts to accommodate almost any user preference.

Sensor Input Channels: (optional upgrade)

This upgrade activates additional inputs for the wiring of sensors into the C187.

Includes:

  • 6 Analog voltage inputs.
  • 4 Analog temperature inputs.

Advanced Functions: (optional upgrade)

Includes:

  • Advanced Maths.
  • Channel Maths.
  • 16 x 2D Tables. (4 as standard)
  • 16 x 3D Tables. (4 as standard)
  • 50 User Conditions. (20 as standard)

T2 Telemetry: (optional upgrade)

  • MoTeC's next generation Telemetry software.

Upgrading a previously purchased MoTeC product.

All Upgrade Option Codes for Motec Products are purchased based on the Serial Number of the product that is to be upgraded.

The Serial Number can be determined by:

  1. The Serial number can be found printed on the product.
  2. Connect to the harness and use the Dash Mgr software to read the serial number. Select - Online | Enable Dash Options.
  3. You can also find the serial number by looking at the logged data file.

Please provide the serial number when ordering the upgrade. Once we receive it the upgrade code will be emailed to you with in 24 hours M-F.

Warranty

Product Reviews Write A Review

Comments

No reviews yet, be the first to review this product!

Product Q & A


View Related Products
CBM MOTORSPORTS AEM CD-7 CARBON DIGITAL RACING DASH DISPLAY KIT
CBM MOTORSPORTS AEM CD-7 CARBON DIGITAL RACING DASH DISPLAY KIT

Price: $1,399.99
In Stock

View More
MoTeC C127 COLOR DISPLAY DASH / LOGGER
MoTeC C127 COLOR DISPLAY DASH / LOGGER

Price: $2,680.99
In Stock

View More
MOTEC IGNITION EXPANDER MODULE IEX
MOTEC IGNITION EXPANDER MODULE IEX

Price: $413.99
In Stock

View More
MoTeC i2 PRO DATA ANALYSIS SOFTWARE
MoTeC i2 PRO DATA ANALYSIS SOFTWARE

Price: $1,300.00
In Stock

View More