Part Number: MLE-930223170
The MAHLE Motorsports PowerPak kit is a high volume shelf stock program developed for high performance enthusiasts and sportsman class racers. The PowerPak pistons are predominantly made from 4032 alloy to allow for tighter cylinder to wall clearances and improved temperature stability. Each kit is complete with a set of high performance rings, containing either a low drag 1.0mm, 1.0mm, 2.0mm set, a 1.5mm, 1.5mm, 3.0mm set, or a 1/16", 1/16”, 3/16” high performance Ring Pak standard with big block kits.
PowerPak features include:
* MAHLE’s GRAFAL® skirt coating reduces drag, scuffing, friction and cylinder bore wear; reduces piston noise.
** Phosphate coating provides the grey appearance to the MAHLE piston. This dry lubricant coating (not to be confused with a thermal film coating) provides a lubricant film in the pin bores and ring grooves until the oiling system of the engine reaches operating pressure; particularly useful during the initial start-up or break-in of engines to protect against galling and microwelding. The piston crown is still machineable.
Designed for GM LS3 style V8 engines.
Due to the nature of performance applications, Mahle Motorsports parts are sold without any warranty, expressed or implied.
© 2019 Copyright CBM Motorsports™ LLC. All Rights Reserved.
Some parts are not legal for sale or use in California on any pollution-controlled motor vehicles.Store Site Map | CBM Design | Environmental Mission Statement / Prop 65