HP TUNERS PROLINK+ CABLE FOR MPVI2+ AND MPVI3

Designed specifically for MPVI2+ and MPVI3, the PROLINK+ cable allows professional users to input 2x analog signals (from a wideband sensor, map sensor, boost pressure sensor etc.) and 1x CAN bus signal simultaneously.

Since the latest generation MPVI3 interface is standard with Pro Feature Set, you only need to purchase the PROLINK+ cable to wire in these additional inputs. No other purchase is required.

To utilize the PROLINK+ cable with an MPVI2+ interface, the purchase of Pro Feature Set is required. PROLINK+ will be provided FREE of charge (plus shipping) with the purchase of Pro Feature Set for MPVI2+ interfaces.

Pro Feature Set enables the use of PROLINK+ for both MPVI2+ and the latest generation MPVI3. However, remember that MPVI3 is now standard with Pro Feature

Pro Feature Set also unlocks standalone data logging, allowing you to log directly to your interface’s internal storage without being tethered to a laptop. This highly convenient feature makes it easier than ever to collect data while on the road, track, or dyno.

Features:

• 2x dedicated 0-5V analog inputs.
• 1x CAN bus input (500kbps).
• 100Hz sampling rate.
• M8 connector to 5 wire harness.
• For MPVI2+ and MPVI3 interfaces.
• MPVI2+ interfaces must purchase Pro Feature Set to be able to use the PROLINK+ cable.

Note::

If you have an MPVI2+ interface, you must purchase Pro Feature Set to be able to use a PROLINK+ cable. The purchase of Pro Feature Set for MPVI2+ includes a PROLINK+ cable free of charge (plus shipping).

Designed specifically for HP Tuners  MPVI2+ and MPVI3 interfaces.

All new HP Tuners products carry a 6-month warranty from the date of purchase. This warranty shall become void if your HP Tuners product: has been modified or repaired in a manner not previously authorized by HP Tuners in writing; was subjected to accident, abuse, theft, or improper use; was not used or configured as specified in the product manual; was subjected to operating conditions more severe than those specified in the product manual or exposed to water and/or extreme heat; or identification markings have been removed, defaced, or altered.