CBM MOTORSPORTS™ 2.2L/2.4L/L61/LE5/LSJ ECOTEC BILLET FUEL RAIL ADAPTER FITTINGS -6AN

These billet adapters are for stock Ecotec style fuel rails. They adapt the factory inlet and return fittings to -6AN fittings, the return fitting has a thread pitch of 20mm x 1.0. They are proudly made here in the USA from 6061-T6 aircraft grade aluminum.

The push on fitting is for the 3/8" feed line with rib and the threaded fitting adapts the regulator. This is the set up for those of you that are looking to run the stock regulator that is built into this style fuel rail. These fittings will only fit this style Ecotec fuel rail.

The feed fitting includes two internal o-rings and the return includes an external o-ring for a leak free seal. When running a 45 degree fitting on the return, it runs right next to the feed side for a clean look.

NOTE: Please verify your rail uses a 20mm x 1.0 fitting before ordering.

For stock GM Ecotec style fuel rails with a regulator

CBM Motorsports™ products are warranted to be free from defects in material and workmanship for a period of 90 days from the date of purchase. CBM Motorsports™ electronic components and products are warranted to be free from defects in material and workmanship for a period of 30 days from the date of purchase. If the any part does not meet the limited warranty criteria an RMA number will have to be initiated to set up an exchange or refund.

The part must be returned to CBM with an RMA number assigned to it, and if it is in acceptable condition, CBM will issue credit directly to the customer. In addition, CBM Motorsports™  limited warranty specifically does not apply to products which have been modified or altered in any way, subjected to adverse conditions such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion or faulty repair, or used in racing activities or competitive  applications other than those recommended by CBM Motorsports™ . This warranty does not warrant and disclaims all liability for products used in racing activities and/or applications, other than those specifically recommended by CBM Motorsports™.