ince 1987, Whipple Superchargers™ have been the pioneers and leaders of twin-screw supercharging. Whipple was the first to bring positive displacement technology to fuel injected. With over 30+ years of GM twin-screw supercharging experience, Whipple's team have now engineered one of the most powerful intercooled twin-screw SC system available today for your LS based engine. Whether you have a LS1, LS2, LS3, LS6, LS7 or anything in between, Whipple has a front entry SC system that will work for your hot-rod, sand rail or whatever other application you need neck whipping power for.
With all the latest technology, the all new Whipple system makes more power than any other positive displacement supercharger system on the market giving you tire frying, neck whipping power that will give you a grin from ear to ear. The all-new system features Whipple's massive oversized air-to-water intercooler for unmatched cooling capacity, a unique front feed W175FF (a whopping 2.9 liters) integrated Whipple twin-screw supercharger that reaches 99% volumetric efficiency and industry leading power potential.
This kit includes only the supercharger and built-in intercooler and intake manifold system. No heat exchanger, piping, fuel system, or any other parts. Custom built kits can be setup for LS3 style square port heads or LS1/LS6 cathedral port heads, and LS3 Camaro belt line, C5/C6 Corvette belt line or Wegner belt line, and be polished or custom powdercoated as well.
This part is intended to be used solely on a race vehicle or non-emissions based pre 1965 vehicle.
WHIPPLE SUPERCHARGERS EXCLUSIVE FEATURES:
- Front entry W175AX (2.9 liters) Whipple twin-screw supercharger that significantly outperforms competitions 1.9L and 2.3L roots-type systems.
- 26% bigger than the 2.3L roots.
- 52% bigger than the 1.9L roots.
- Front feed supercharger utilizes precision ground helical cut gears vs a problematic belt.
- Integrated casting to minimize bolt on pieces, adapters, leaks and flow restrictions.
- Integrated Crusher™ venturi shaped inlet for maximum airflow capacity and minimal rotor cavitation.
- Integrated Crusher™ 112mm round inlet outflows smaller 90 and 93mm inlets such as other Eaton based systems.
- Integrated Crusher™ 112mm round inlet for optional 102mm throttle bodies.
- Center front entry works perfect with hot rod applications, allowing for easy air ducting to supercharger.
- Integrated design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas.
- Massive air-to-water aluminum bar-plate intercooler offers more cooling than any other positive displacement system available.
- Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy, no ridiculous fabbed steel tubes or systems that circulate hot air.
- Self-contained oversized oil system for dramatically reduced oil temps in even the most demanding conditions.
- Exclusive 3x5 rotor combo for significant increase in airflow under the curve than less efficient roots type.
- Zero turn inlet allows for decreased induction losses when compared to rear inlet systems and 180deg bends.
- Billet fuel rails with AN type female threads for easy plumbing.
- Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge.
- Discharge down design allows for less pressure loss which gives more power at lower boost levels.
- Top mount design allows for cooler operation then upside down SC's that conduct heat from engine and are trapped by runners and covers, causing hotter manifold temps and less power per pound of boost.
- More boost at the "hit" than any other twin-screw.
- Flat torque curve for incredible acceleration.
- No internal modifications required.
- Completed installation looks factory installed, not some cobbled together kit with multiple billet adapters.
- Kits come complete with all necessary parts and hardware for installation.
- Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread.
- Works with short high flow fuel injectors.
- Proven 6-rib belt system with heavy duty spring loaded tensioner and adjustable idler system.
- Optional 10-rib belt system with matching billet pulleys.
- Works with Wegner belt system.
- Stainless steel jack-shaft with unique plastic cover (or optional carbon fiber) for increased safety.
- Available in gloss black, polish or any custom color.
- Works with stock 80mm, 90mm TB, aftermarket 102MM and Whipple 109mm.
- Instant boost at the touch of the throttle.
- 3 minute pulley changes.
WHIPPLE SUPPERCHARGERS ORDERING INFORMATION:
- This is a special order item please allow 1 to 4 weeks for delivery.
- Must provide engine displacement, cylinder head style and supercharger finish at time of order.
- Please call for more info. 909.291.7550 x2004
CBM Motorsports is an authorized Whipple Superchargers installer and offers LS based Whipple Supercharger installations in shop.
Please call 909.291.7550 for more information and quotes.
THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED COMPETITION WHICH MAY NEVER BE USED UPON A PUBLIC ROAD OR HIGHWAY, UNLESS PERMITTED BY SPECIFIC REGULATORY EXEMPTION (VISIT THE “EMISSIONS” PAGE FOR STATE BY STATE DETAILS.
LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES WHICH MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY.
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.
THIS POLICY ONLY APPLIES TO INSTALLERS AND/OR USERS WHO ARE LOCATED IN THE UNITED STATES, HOWEVER CUSTOMERS WHO RESIDE IN OTHER COUNTRIES SHOULD ACT IN ACCORDANCE WITH THEIR LOCAL LAWS AND REGULATIONS.
