MCLEOD RXT 1200 TWIN DISK CLUTCH KIT

Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable.

Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.

Kit includes:

• Pressure Plate.
• Two ceramic friction discs.
• Floater plate.
• Adapter ring & pilot tool.

NOTE: GM LS-X Applications will only work with LS1/LS6 Flat style flywheels. All applications with LS2/LS3/LS7 recessed flywheels will not work.

McLeod RXT1200 Street twin clutch kit for:

• 1997-2013 GM LS-X.
• 2001-2017 Ford 4.6/5.0L 1-1/8x26
• Pontiac GTO 2004 5.7L Engine.
• Chevrolet: Camaro 1998-2002 5.7L Engine.
• Ford Mustang 2001-2010 4.6L Engine.
• Chevrolet Camaro 2014-2015 7.0L Engine.
• Ford: Mustang 2011-2017 5.0L Engine.
• Chevrolet Corvette 2005 -2007 6.0L Engine.
• Chevrolet Corvette 1997-2004 5.7L Engine.
• Pontiac Firebird 1998-2002 5.7L Engine.
• Pontiac GTO 2005-2006 6.0L Engine.
• Chevrolet Corvette 2006-2013 7.0L Engine.
• Chevrolet Corvette 2008-2013 6.2L Engine.
• Chevrolet Camaro 2010-2015 6.2L Engine.
• Ford Mustang 2001-2010 4.6L Engine

McLeod Racing LLC, products are warranted to be free from defects in material and workmanship for the period of ninety (90) days, from the date of purchase. McLeod does not warrant or make any representations concerning its products when not installed and/or used strictly in accordance with the manufacturer’s instructions for such; installation and operation, and in accordance with good installation and maintenance practices of the automotive industry. Products purchased used do not carry a warranty. This warranty is to the original purchaser and is nontransferable.

McLeod Racing LLC will not be held liable for the labor charges and other intangible or consequent losses that might be claimed as a result of the failure of any part, nor shall it be liable for damages or injury to persons or property resulting from the misuse or improper installation of any part subject to this warranty.

No merchandise may be returned for any reason unless prior return merchandise authorization number (RMA) has been obtained from McLeod. An RMA number may be obtained via ww.mcleodracing.com or by calling McLeod directly.

McLeod Racing LLC reserves the right to examine all parts returned for warranty claim to determine whether or not any such part has failed because of a defect in material or workmanship. McLeod's obligation under this warranty shall be limited to repairing, replacing or crediting, at its option, any part found to be defective. All products returned to McLeod for warranty inspection must be prepaid by the customer under this warranty.

In a racing environment, the type of stress placed on automotive parts can vary dramatically by the type of use, driving style, track preparation, differing tire style and other variables that are out of McLeod's control. For this reason, any parts used in a racing environment shall be void of any warranty either expressed or implied.

There are no other warranties, either expressed or implied including, but not limited to, warranty of merchantability, and warranty of fitness for a particular purpose which extend beyond those set forth in the preceding paragraphs. This warranty shall be interpreted and applied in accordance with California law.

For any changes or updated versions of the warranty described above, please refer to www.mcleodracing.com before installation of product.