725 SOUTH LA CADENA DRIVE COLTON CA USA 92324
909.291.7550

CBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECU

CBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECU
CBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECUCBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECUCBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECU
CBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECUCBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECU

Part Number: CBM-MOTEC-M130-WH

Price: $1,099.99

Special Order Item
Please Allow 2 Weeks for delivery.

Fuel Injectors:
Crank Sensor:
Quantity:

CBM MOTORSPORTS™ LS SERIES STANDALONE WIRING HARNESS FOR GEN III / GEN IV LS USING A MOTEC M130 ECU Product Description:

Overview

This harness is for a Gen III / Gen IV LS engine using a MoTeC M130 ECU.

All CBM Motorsports™ harnesses are completely plug and play with switched power, constant power and ground connections required. Harnesses are professionally constructed from brand new GM Delphi connectors and TXL (Polyethylene Cross Linked) High Temperature Wire to GM Specifications.

This is not a modified OEM harness. Every clip, connector and pin is brand new. All blunt cut wires are clearly labeled for easy installation. We use genuine weather pack Delphi plugs for every connection (not knock off China plugs). This is a show quality harness and uses all expandable sleeving, not cheap plastic split loom. All wires are correct AWG and have heat shrink at each end.

Every harness comes with a four foot lead to mount the computer under a seat, inside the passenger compartment, on a firewall, etc. The package comes with a water tight relay pack and fuse holder. All harness`s are 100% Quality Inspected prior to shipping.

Standalone Engine Wiring Harness for Gen III / Gen IV LS using a MoTeC M130 ECU features:

  • Blunt cut wires clearly labeled.
  • Genuine weather pack Delphi plugs.
  • Expandable sleeving.
  • All wires are correct AWG and have heat shrink at each end.
  • Four foot lead.
  • Labeled connectors.

Standalone Engine Wiring Harness for Gen III / Gen IV LS using a MoTeC M130 ECU includes:

  • Standalone engine wiring harness.
  • All engine sensor connectors.
  • ALDL Connector.
  • Fuel Pump Relay.
  • Switched Power Ignition Relay.
  • Tach Wiring.
  • Complete Detailed Instructions.

ECU not included.

Note: Harnesses are for non-emissions equipped vehicles and do not include air pump or EGR provisions.

CBM Motorsports
909-291-7550
cbmsales@custombuiltmotors.com


 width=

Specifications

Application

Gen III / Gen IV LS engine using a MoTeC M130 ECU.

Suggested Parts

Warranty

CBM Motorsports™ products are warranted to be free from defects in material and workmanship for a period of 90 days from the date of purchase. CBM Motorsports™ electronic components and products are warranted to be free from defects in material and workmanship for a period of 30 days from the date of purchase. If the any part does not meet the limited warranty criteria an RMA number will have to be initiated to set up an exchange or refund.

The part must be returned to CBM with an RMA number assigned to it, and if it is in acceptable condition, CBM will issue credit directly to the customer. In addition, CBM Motorsports™  limited warranty specifically does not apply to products which have been modified or altered in any way, subjected to adverse conditions such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion or faulty repair, or used in racing activities or competitive  applications other than those recommended by CBM Motorsports™ . This warranty does not warrant and disclaims all liability for products used in racing activities and/or applications, other than those specifically recommended by CBM Motorsports™.

Product Reviews Write A Review

Comments

No reviews yet, be the first to review this product!

Product Q & A


Related Products
CBM MOTORSPORTS™ 250AMP HIGH OUTPUT BILLET LS ALTERNATOR WITH BLACK PULLEY
CBM MOTORSPORTS™ 250AMP HIGH OUTPUT BILLET LS ALTERNATOR WITH BLACK PULLEY

Price: $549.99

View More
MSD PRO POWER GM LS1/LS6 COILS, 8-PACK, RED
MSD PRO POWER GM LS1/LS6 COILS, 8-PACK, RED

Price: $898.95

ECUMaster PMU 16 POWER MANAGEMENT UNIT
ECUMaster PMU 16 POWER MANAGEMENT UNIT

Price: $1,385.00 - $1,540.00

View More
TRIGGER ONE BLUETOOTH SOLID STATE RELAY
TRIGGER ONE BLUETOOTH SOLID STATE RELAY

Price: $56.97